Karlee’s Allover Graffiti Quilting – Collection

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$175.00 $150.00




First of all, this design is NUTS! It was created with the intent to mimic what Karlee’s quilting looks like when she does Allover Graffiti Quilting on a functional quilt. The collection consists of 8 individual rows, that are each stitched out, one on top of the next. This design can be stitched out all in one color, or in 8 different colors. You can stitch each row of the design as large as your machine’s throat space will allow without advancing the fabric.

The design as a whole has a dimensional ratio of 4:5. This means that you can stitch out a functional quilt at 40″ wide by 50″ tall, or 80″ wide by 100″ tall, etc. Each individual row has a dimension of APPROXIMATELY 7:40. This means that if you want to quilt this on a quilt that is 40″ wide, you need to make sure that your machine can accommodate 7″ within it’s throat. Use this chart to get a better understanding of how large of a quilt you can create based on your machines throat space:

Max throat space | Largest width quilt you can create
7″ | 40″
8″ | 46″
9″ | 52″
10″ | 59″
11″ | 64″
12″ | 70″
13″ | 75″
14″ | 81″
15″ | 87″
16″ | 95″
17″ | 101″
18″ | 107″
19″ | 112″
20″ | 118″

That being said, there is a little bit of wiggle room. If you need to stretch the width of the design to accommodate the width of your quilt, you can do so. When stitching out this design, it would look best to make sure that the design’s width is about 2″ wider than the width of the actual quilt top, so that the design stitches off the edges just slightly. Also, you will want to make sure that the height of the WHOLE design is larger than the height of your actual quilt top.

This design is also created to stitch UPSIDE DOWN, just as Karlee does when she free-motion quilts Graffiti Quilting on functional quilts. She also LOADS THE QUILT TOP UPSIDE DOWN, meaning, that the quilting starts at the bottom, right corner of the quilt top (when the quilt top is oriented in the upright orientation. The design is meant to flow in an upward direction on a finished quilt. So, if the quilt was laid on a bed in it’s correct orientation, the quilting design should flow from the foot to the head of the bed.

Finally, Karlee recommends that when using this design for an allover design on a functional quilt, to use a blending thread color (monofilament is fantastic) so that the design adds texture, without adding color to the quilt top. You will find that this design has an organic aesthetic to it. Please remembers that even though this design is technically computerized, it is not perfect and exact in all places (just as Karlee’s quilting is not always exact and perfect in all places.) But, she can assure you that this design will be beautiful.

It is also recommended that upon purchasing this design, you quilt it out once using a practice piece of fabric, to fully understand how each row nests with the last, but also to make sure that you can successfully advance your quilt while keeping the design aligned, on your own specific machine. (Unfortunately, Karlee cannot write a tutorial on how to actually stitch out this design, because each brand of quilting machine software is so varying.) Perhaps you can purchase two cheap bed sheets and give this allover design a go. That way, if it isn’t perfect the first time around, you won’t be sad that you used a nice, pieced, quilt top.

This collection includes the following quilting filetypes: CQP, DXF, HQF, IQP, PAT, PLT, QLI, SSD, TXT, and WMF.

This package also contains the design in the following Embroidery formats: DST, EXP, HUS, JEF, PCS, PES, SEW, SHV, VIP, VP3, and XXX with the design dimension of 8″x10″. (Do not purchase this design if your embroidery machine cannot accommodate this size. The design is too intricate to be stitched out any smaller than 8×10.)

There is a jump between each color, to allow you to change thread colors, if you desire. Just make sure your machine is set to pause between jump stitches.

Recommended Quilting Instructions: Stitch each row atleast 7″ tall or larger, and at a slow to medium speed.

Embroidery Disclaimer: At this time, because embroidery machine systems differ so significantly, embroidery formats are only tested digitally, not actually stitched out. Purchase at your own risk.

Happy Quilting!

1 review for Karlee’s Allover Graffiti Quilting – Collection

  1. Rated 5 out of 5

    Catherine Bavington (verified owner)

    This pattern is absolutely incredible! I slowed down my machine and let it go. I quilted it on gradated fabric and changed thread after each row. I had no problems quilting, and the results were stunning! This is my favorite pattern of all time, and I will definitely use it again. Fantastic work, Karlee!

Add a review

Your email address will not be published. Required fields are marked *